Universal Forest Products

Dimensions Plastic Lattice
Dimensions Plastic Lattice

Installation Tips

Dimensions™ Plastic Lattice is easy to install with conventional tools. We offer matching caps to complete the decorative look of your lattice, as well as matching dividers to connect lattice panels together.

The Universal Privacy Screen is easy to assemble and install. Most parts snap or slide together, and the only tool required is a screwdriver. You can set up the panels on flat hard surfaces like concrete, or stake them into the ground. Either way, you have the flexibility of moving and adjusting them after you've set them up.

 

Dimensions Lattice can be cut and drilled using standard tools.

For a distinguished look, frame panels with plastic caps and connect panels with plastic dividers. Always allow 1/4" gap between the lattice edge and molding for the panel to expand and contract with temperature changes.

Lattice must be attached to a self-supporting structure or frame.
Suspend lattice from top row of fasteners.
  • Along the top, pre-drill oversized holes every two feet through both the molding and lattice and fasten with screws. Do not over-tighten.
  • Along the sides and bottom, pre-drill oversized holes every two feet through the molding only and fasten with #8 ss sheet metal screws. Do not over-tighten screws.