Installation and Maintenance
The Keystone 6' Picnic Table Kit assembles in 5 minutes or less without the need for tools!
The Keystone connectors are factory mounted; simply slide them together for a secure connection.
Prior to assembling your table, apply two brush coats of water repellant to the table components.
Kit Components
2 – Pre-assembled Table Legs
2 – Pre-assembled Seats
1 – Pre-assembled Tabletop
| Assemble using these easy steps: | |||
|---|---|---|---|
| Step 1 | Lay the pre-assembled tabletop upside down on the ground. |  |
|
| Step 2 | Attach the legs to the tabletop by sliding the connectors together. Tap on the legs to secure in place. |  |
|
| Step 3 (Optional) | If you plan to leave the table assembled, the tabletop can be secured to the legs with the screws provided. Use a drill or screwdriver and attach a screw through each tabletop bracket and into the leg bracket. This will allow you to move the table without disassembling it. |  |
|
| Step 4 | Turn the table upright. |  |
|
| Step 5 | Attach the seats to the cross supports by sliding the connectors together. Tap on the seats to secure in place. |  |
|
Care and Maintenance
To maintain the appearance of the wood used to construct your table, we suggest performing the following maintenance bi-annually:
- Start by cleaning your table with a cleaner/brightener that contains a mildewcide.
- Apply an outdoor wood sealer that contains both a water repellant and an ultraviolet stabilizer.
View the Keystone 6’ Picnic Table Kit warranty and safe handling information.
