Equator® Hidden Fastener Installation
A set of 175 pieces of Equator Hidden Fasteners can install 100 square feet of 6” wide (5-1/4” actual) deck boards on 16” centers or 87 square feet of 6” wide (5-1/4” actual) deck boards on 12” centers.
Equator Hidden Fasteners can be installed in just four easy steps:
 |
1. Place an Equator fastener in the slot of the composite deck board at each support joist. |
| 2. Insert a stainless steel screw through each fastener into the joist. | |
 |
3. Slide the next deck board into place so that the wings fit into the slot on the deck board’s side. |
 |
4. Repeat this process until the deck is complete. |